DevTech101

DevTech101

ilom

How to reset ILOM password from Solaris

Execute the following command from Solaris physical machine to reset ILOM password: Note: The below might work on Linux and Windows if it has the ipmitool installed. ipmitool user set password 0x02 NEW_PASSWORD Note: Where 0x02 is the root user and NEW_PASSWORD is the new desired password for the ILOM.

Obtaining a servers serial number using the ilom or ipmi

To obtain the ILOM serial number Type the following command: show /SYS product_serial_number The following is an example of the results of this command /SYS Properties: product_serial_number = 0723BBC006 This serial number should always match the serial number returned by service tags on the host; it should also match the serial number on the label …

Obtaining a servers serial number using the ilom or ipmi Read More »

How To Clear An iLom Fault On A SUN / Oracle Hardware

Clearing a Hardware Fault On A SUN / Oracle Hardware First, launch the Fault Management shell from the SP or CMM CLI. Type one of the following: start /SP/faultmgmt/shell start /CMM/faultmgmt/shell Sub-command Syntax Examples fmadm repaired /SYS/MB/FM0 fmadm repaired /SYS/PS1 fmadm replaced /SYS/MB/FM0 fmadm replaced /SYS/PS1 # OR somthing like the below fmadm repaired /SYS/RCSA/PCIE2/CAR …

How To Clear An iLom Fault On A SUN / Oracle Hardware Read More »

How to Locate Oracle Sun Server Using Locator LED

Web Procedure – Enable or Disable Locate LED In the web interface, click System Monitoring –> Indicators. In the Actions list box, click Name: Locate. To illuminate the Locator LED, select the radio button adjacent to /SYS/LOCATE, and then click Set LED to Fast Blink. To disable the Locator LED, select the radio button adjacent …

How to Locate Oracle Sun Server Using Locator LED Read More »

Sun fire T5140-T5240 initial boot process

To start a Sun fire T5120/T5220/T5140/T5240/blades first login with login password Login: root Password: changeme Then power on the server. -> start /SYS Are you sure you want to start /SYS (y/n)? y Starting /SYS Then connect to the consloe -> start /SP/console Are you sure you want to start /SP/console (y/n)? y To start …

Sun fire T5140-T5240 initial boot process Read More »