Mirroring A Port / Vnic On Oracle OVN (Xsigo) To mirror a single vnic to a single vnic or full port, the dest vnic needs to be on the same card/module. To mirror a source vnic to dest vnic, Note: Its advicsed to create a new vnic on the dest server set vnic all_nets.esx07 -mirror …
Get your device address fwflash -l Get the firmware from MOS fwflash -f fw-ConnectX3-rel-2_11_1280-e0-7046442.bin -d /devices/pci@3c0/pci@1/pci@0/pci@7/pciex15b3,673c@0:devctl
How to fix Oracle OVN (Xsigo) startup errors xms startup will fail with log4j errors log4j:ERROR Error occured while converting date. java.lang.NullPointerException To fix the error stop xms service xms stop Changed log4j pattern in /opt/xsigo/xms/webapps/xms/WEB-INF/classes/log4j.xml From value=”%d %-5p: %c – %m%n” To value=”%d{yyyy-MM-dd HH:mm:ss} Then start the xms, it should start with out any …
Xsigo management startup fails / how to fix that Read More »
First log in to each director as admin and run get-log-files -all xsigo1 get-log-files -all -cores xsigo1 Then copy off the logs scp 10.10.105.51:/var/fsroot/admin/xsigo1.gz .
First check if the PCI card is visble to the system lspci |grep Mellanox 06:00.0 Network controller: Mellanox Technologies MT27500 Family [ConnectX-3] 09:00.0 InfiniBand: Mellanox Technologies MT26428 [ConnectX VPI PCIe 2.0 5GT/s – IB QDR / 10GigE] (rev b0) Then install the Xsigo burn utiltiy rpm ivh xsigo-hca-firmware-4.0.3.r177.XGBOOT-1.i386.rpm Then make sure to burin the Xsigo …