Contents 1 Cofiguring Multipathing 1.1 Install Multipath Package. 1.2 Enable The Multipathing Service. 1.3 List Multipath Disks 2 Zoning FC On Linux 2.1 Find the WWN for the Ports 2.2 Issuing a LIP on the HBA 2.3 Fibre Channel Commands 3 Disk Configuration. 3.1 About Device Names And Paths In A Multipath Configuration 3.1.1 Physical …
After mirroring the device or zfs send install the bootblock installboot -F zfs /usr/platform/`uname -i`/lib/fs/zfs/bootblk /dev/rdsk/c0t1d0s0 First we need to get the lun paths, just run the below to get that {0} ok show-disks a) /pci@500/pci@0/pci@c/SUNW,qlc@0,1/fp@0,0/disk b) /pci@500/pci@0/pci@c/SUNW,qlc@0/fp@0,0/disk c) /iscsi-hba/disk q) NO SELECTION Next get the disk id’s, just run the below to get that. …
Contents 1 How to flap a SAN device path without rebooting in Solaris 2 How to remove SAN devices without rebooting in Solaris 2.1 Another way to offline luns 2.1.1 After the LUNs are unmapped using Array management or the command line, Solaris also displays the devices as either unusable or failing. 2.1.2 If the …
9985v fiber port layout 9985 physical fiber port layout
How to Power off an HDS 9985 Push the door where it says push To power off press Enable + Off at the same time. To power on press Enable + On at the same time.
DCX Mini Port Layout